The Track-Pro. Our First Multi-Fit Pedal System.
Part Number : OBPXY002
Our lightweight range dual brake master cylinder bias controlled pedal boxes have been designed to offer the driver the highest level of efficiency in this critical area.
The Reinforced Mild Steel Pedals are fabricated with a strengthening plate on the rear to enable a strong arm for your pedal force. The pedals are curved pedal pads for comfort and gripped tape. The clutch pedal also includes a stop on the rear to adjust the throw of the pedal.
The base box frame has been developed out of 2mm Mild Steel to provide an improved robustness and strength which is designed to mount up against the bulkhead to provide further support. On the rear of the frame, it has 3 x mounting points for your brake master cylinders (will fit the majority of master cylinders on the market).
The Accelerator Pedal is equipped with two throttle stops that can be adjusted to suit your pedal throw and also a sensitive return spring. On the rear of the pedal, it has the throttle cable linkage installed as standard although it is also Drive By Wire (DBW) Compatible. Simply remove the linkage and replace with a Linear Potentiometer.
Product Information:
- Fitment: Bulkhead Fit
- Pedal Ratio: 5.1
- Weight: 3.2kg
- Available as Hydraulic or Cable Clutch (Adaptor simply bolts onto the rear of the box where the clutch cylinder would normally go)